Adapt to changing weather on your 2017-2026 Can-Am Maverick X3 or X3 MAX with a TerraRider tilting UTV windshield built for models without intrusion bars. It tilts down toward the front, so you can switch between open, vented, or fully closed in seconds, no tools needed. Works with a hard top, a soft top, or no top at all — just choose your setup. This windshield does not fit Maverick X3 or X3 MAX models with intrusion bars.
Built for the desert. Ready to run wide open.
Features and Benefits
- Built for X3 models without intrusion bars — engineered specifically for the 2017-2026 Can-Am Maverick X3 and X3 MAX
- Tilts open, vented, or closed in seconds — half when it's hot and dusty, full when it's cold and wet, without swapping windshields
- Cushioned in the down position — tilts forward onto the hood, with foam bumpers protecting the surface and preventing rattle where it rests
- Shaped to shed water — the top edge bends inward under a soft top or no top so your top lays cleanly over it, outward under a hard top for easier clearance
- Secure clamp, bracket, and strap mount — rubber-sleeved clamps wrap the uprights for a tight, rattle-free fit; dash brackets secure the lower section to the dash, while nylon straps hold the tilting section in its riding positions
- Fits most setups right out of the box — sized to clear standard roof heights and roll bars. Need a different height? We can custom down-size the tilting section to your exact spec at no additional cost
- No drilling or cutting required — installs using pre-drilled holes and slots and the included hardware, with no permanent modifications to your rig
- Designed to tow windshield-down — reduces road debris abuse and wind drag on your trailer
- Made in Wisconsin, USA — the TerraRider team focuses on accurate fitment and quality construction, and is available to help verify your machine before you order
Which Durability Level Is Right for You?
Every TerraRider windshield is made from UV-resistant, impact-resistant polycarbonate. The difference between levels is the surface coating and the thickness.
| Durability Level | Material | What You Get | Best For | Part # |
|---|---|---|---|---|
|
Classic Dependable everyday protection |
3/16" polycarbonate | Reliable protection from wind, debris, branches, and changing weather at our most economical price. | Property owners, farmers, and occasional riders who want dependable protection without paying for upgrades they don't need. | TK00506 (for hard top) TK00509 (for soft or no top) |
|
VisionGuard Clarity that lasts |
3/16" scratch-resistant polycarbonate | Same thickness as Classic, with an abrasion-resistant surface coating that stands up to scratching and surface wear — so it stays clearer and looks newer over the years. | Riders on dusty or wooded trails, and anyone who cleans their windshield often and wants it to stay clear. | TK00507 (for hard top) TK00510 (for soft or no top) |
|
TrailMax Maximum strength for demanding riders |
1/4" scratch-resistant polycarbonate | Thicker material with the same abrasion-resistant coating as VisionGuard. The most rigid option in our lineup — less flex at speed, better durability in demanding conditions. | Higher-speed riders, hunters, and ranchers putting in hard hours where flex and durability matter most. | TK00508 (for hard top) TK00511 (for soft or no top) |
What's Included
- (1) Tilting windshield panel
- (5) Rubber-sleeved clamps, 2"
- (2) Dash brackets
- (4) Nylon straps, 12"
- (4) Foam bumpers, 1" OD, black, sticky-back
- (6) Phillips bolts, 1/4-20 x 1"
- (2) Phillips bolts, 1/4-20 x 3/4"
- (2) Body bolts, M6-1.0 x 20mm
- (8) Lock washers, 1/4"
- (7) Hex nuts, 1/4-20
- (1) Wing nut, 1/4-20
- (1) Center support
- (1) Installation guide
About Our Tilting Windshield
A TerraRider tilting windshield for your UTV, or side-by-side, is our most versatile style, built for riders who want it all. It tilts down toward the front, letting you switch between fully closed, vented, or fully open positions in seconds — no tools needed. Whether you're braving winter chill or cooling off mid-summer, it adapts instantly to your ride. If the standard height doesn't suit your setup, we can size the tilting section to your spec at no extra cost.
Can-Am introduced the Maverick X3 for 2017 as its flagship performance side-by-side, then brought media to Baja to drive it across the same rugged terrain used by the Baja 500 and Baja 1000. At launch, the X3 combined a 154-horsepower turbocharged three-cylinder Rotax ACE engine with up to 24 inches of suspension travel.
Every panel is manufactured — not imported or reproduced — right here in Wisconsin, and supported by people who can help verify your fitment. At TerraRider, every windshield is built from premium polycarbonate for unbeatable strength and clarity, so you can ride with confidence, whatever the terrain brings — long desert washes, steep dune faces, a rocky climb on the way back to camp.
This windshield fits the 2017-2026 Can-Am Maverick X3 and X3 MAX without intrusion bars. It does not fit X3 or X3 MAX models with intrusion bars. It also does not fit 2013-2018 Can-Am Maverick original models, Maverick Trail models, Maverick Sport models, or Maverick R models.
Fitment — 2017-2026 Can-Am Maverick X3 / X3 MAX
| Year(s) | Make | Model | Fits |
|---|---|---|---|
| 2017-2026 | Can-Am | Maverick X3 | Yes |
| 2017-2026 | Can-Am | Maverick X3 MAX | Yes |
| 2013-2018 | Can-Am | Maverick original models | No |
| Can-Am | Maverick Trail models | No | |
| Can-Am | Maverick Sport models | No | |
| Can-Am | Maverick R models | No |
Not sure which you have? Send us photos or measurements and we'll confirm before you order.
Please verify your intrusion-bar configuration before ordering — this tilting windshield fits Maverick X3 and X3 MAX models without intrusion bars only. It does not fit models with intrusion bars.
The 2013-2018 original Maverick, Maverick Trail, Maverick Sport, and Maverick R are different machines from the Maverick X3 / X3 MAX. We offer separate windshields for the original Maverick, Trail, and Sport — see those listings, or contact us and we'll point you to the right one.
Fitment note: Aftermarket roofs, mirrors, light bars, cab enclosures, or other cage-mounted accessories may interfere with windshield installation. Please verify accessory clearance before placing your order. If you have any questions about fitment or existing accessories, contact us before ordering and we'll be happy to help.
Buy With Confidence
UTV body styles, roll cages, and cab configurations can vary between model years, making windshield selection confusing. Need help confirming fitment? Our team can review your year, make, model, measurements, or photos to help determine the correct windshield application before ordering.
Should you need a return or exchange, you may do so within 30 days, as long as the protective coating hasn't been peeled back further than needed to expose the mounting holes during install.
Cleaning and Warranty
Every TerraRider UTV windshield includes a two-year limited warranty covering yellowing, discoloring, or breaking due to manufacturer or material defects.
Never wipe a dry or dirty windshield — rinse away dirt and debris with clean water first, then use a microfiber cloth in long, straight swipes. Proper care is a condition of the warranty — full cleaning instructions and complete warranty terms are on our website.