Adapt to changing weather on your 2021-2026 Can-Am Commander with a TerraRider tilting UTV windshield. Designed specifically for Commander models with the formed windshield frame, it gives you full coverage when conditions turn cold or wet and open-air ventilation when the weather warms up. It does not fit 2011-2020 Can-Am Commander models with the tubular roll cage. Works with a hard top, a soft top, or no top at all — just choose your setup.
Built to do more. Ready to go farther.
Features and Benefits
- Built for the formed-frame Commander — engineered for 2021-2026 Commander models with an approximately 39.5" front windshield opening, with the lower windshield shaped to sit securely in the formed-frame pocket below the hood
- Tilts open, vented, or closed in seconds — half when it's hot and dusty, full when it's cold and wet, without swapping windshields
- Cushioned in the down position — foam bumpers protect the contact area where the tilting section meets the lower panel; the soft top or no top version also uses bumpers where the windshield contacts the body when secured down
- Shaped to shed water — the top edge bends inward under a soft top or no top so your top lays cleanly over it, outward under a hard top for easier clearance
- Secure formed-frame clamp and strap mount — the lower panel seats in the pocket below the hood and clamps fasten it at the side upright supports, with nylon straps securing the tilting section
- Center support with quick release — the hard top version adds a metal support that steadies the tilting section in the up position, with a wing nut so you can drop the windshield without tools
- No drilling or cutting required — installs with the included mounting hardware, with no permanent modifications to your rig
- Fits most setups right out of the box — sized to clear standard roof heights and roll bars. Need a different height? We can custom down-size the tilting section to your exact spec at no additional cost
- Designed to tow windshield-down — reduces road debris abuse and wind drag on your trailer
- Made in Wisconsin, USA — the TerraRider team focuses on accurate fitment and quality construction, and is available to help verify your machine before you order
Which Durability Level Is Right for You?
Every TerraRider windshield is made from UV-resistant, impact-resistant polycarbonate. The difference between levels is the surface coating and the thickness.
| Durability Level | Material | What You Get | Best For | Part # |
|---|---|---|---|---|
|
Classic Dependable everyday protection |
3/16" polycarbonate | Reliable protection from wind, debris, branches, and changing weather at our most economical price. | Property owners, farmers, and occasional riders who want dependable protection without paying for upgrades they don't need. | TK00168 (for hard top) TK00331 (for soft or no top) |
|
VisionGuard Clarity that lasts |
3/16" scratch-resistant polycarbonate | Same thickness as Classic, with an abrasion-resistant surface coating that stands up to scratching and surface wear — so it stays clearer and looks newer over the years. | Riders on dusty or wooded trails, and anyone who cleans their windshield often and wants it to stay clear. | TK00330 (for hard top) TK00332 (for soft or no top) |
|
TrailMax Maximum strength for demanding riders |
1/4" scratch-resistant polycarbonate | Thicker material with the same abrasion-resistant coating as VisionGuard. The most rigid option in our lineup — less flex at speed, better durability in demanding conditions. | Higher-speed riders, hunters, and ranchers putting in hard hours where flex and durability matter most. | TK00468 (for hard top) TK00469 (for soft or no top) |
What's Included
For a hard top
- (1) Tilting windshield panel
- (4) Clamps, 1/8" T x 3/4" W
- (4) Nylon straps, 12"
- (4) Foam bumpers, 1" OD
- (6) Phillips bolts, 1/4-20 x 1"
- (4) Nylon washers, 1/4"
- (6) Lock washers, 1/4"
- (4) Hex nuts, 1/4-20
- (2) Wing nuts, 1/4-20
- (1) Center support
- (1) Installation guide
For a soft top or no top
- (1) Tilting windshield panel
- (4) Clamps, 1/8" T x 3/4" W
- (4) Nylon straps, 12"
- (8) Foam bumpers, 1" OD
- (4) Phillips bolts, 1/4-20 x 1"
- (4) Nylon washers, 1/4"
- (4) Lock washers, 1/4"
- (4) Hex nuts, 1/4-20
- (1) Installation guide
About Our Tilting Windshield
A TerraRider tilting windshield for your UTV, or side-by-side, is our most versatile style, built for riders who want it all. It tilts down toward the front, letting you switch between fully closed, vented, or fully open positions in seconds — no tools needed. Whether you're braving winter chill or cooling off mid-summer, it adapts instantly to your ride. If the standard height doesn't suit your setup, we can size the tilting section to your spec at no extra cost.
Can-Am built the Commander as a work-and-play crossover, pairing practical utility with trail performance. The 2021-2026 generation uses a formed windshield frame with an approximately 39.5" front opening, so it takes a different windshield than the 2011-2020 tubular-cage Commander.
Every panel is manufactured — not imported or reproduced — right here in Wisconsin, and supported by people who can help verify your fitment. At TerraRider, every windshield is built from premium polycarbonate for unbeatable strength and clarity, so you can ride with confidence, whatever your day brings — chores around the property, gear hauled out for a hunt, a family trail ride when the work is done.
This windshield fits the 2021-2026 Can-Am Commander 700 DPS, 700 XT, 1000R DPS, 1000R XT, 1000R XT-P, and 1000R X mr. It does not fit Commander Limited or Commander MAX models, or 2011-2020 Commander models with the tubular roll cage.
Fitment — 2021-2026 Can-Am Commander
| Year(s) | Make | Model | Fits |
|---|---|---|---|
| 2021-2026 | Can-Am | Commander 700 DPS | Yes |
| 2021-2026 | Can-Am | Commander 700 XT | Yes |
| 2021-2026 | Can-Am | Commander 1000R DPS | Yes |
| 2021-2026 | Can-Am | Commander 1000R XT | Yes |
| 2021-2026 | Can-Am | Commander 1000R XT-P | Yes |
| 2021-2026 | Can-Am | Commander 1000R X mr | Yes |
| Can-Am | Commander Limited | No | |
| Can-Am | Commander MAX | No |
Not sure which you have? Send us photos or measurements and we'll confirm before you order.
Please verify your mounting style before ordering. The 2011-2020 Commander uses a tubular roll cage and takes a different windshield — see our 2011-2020 Can-Am Commander listings, or contact us and we'll point you to the right one.
Fitment note: Aftermarket roofs, mirrors, light bars, cab enclosures, or other cage-mounted accessories may interfere with windshield installation. Please verify accessory clearance before placing your order. If you have any questions about fitment or existing accessories, contact us before ordering and we'll be happy to help.
Buy With Confidence
UTV body styles, roll cages, and cab configurations can vary between model years, making windshield selection confusing. Need help confirming fitment? Our team can review your year, make, model, measurements, or photos to help determine the correct windshield application before ordering.
Should you need a return or exchange, you may do so within 30 days, as long as the protective coating hasn't been peeled back further than needed to expose the mounting holes during install.
Cleaning and Warranty
Every TerraRider UTV windshield includes a two-year limited warranty covering yellowing, discoloring, or breaking due to manufacturer or material defects.
Never wipe a dry or dirty windshield — rinse away dirt and debris with clean water first, then use a microfiber cloth in long, straight swipes. Proper care is a condition of the warranty — full cleaning instructions and complete warranty terms are on our website.