Adapt to changing weather on your Prowler Pro, Prowler Pro CREW, or Tracker 800SX with a TerraRider tilting UTV windshield. Designed specifically for the 2019 Textron Off Road Prowler Pro; the 2020-2024 Arctic Cat Prowler Pro, Prowler Pro XT, and Prowler Pro CREW; and the 2020-2024 Tracker Off Road 800SX, it gives you full coverage when conditions turn cold or wet and open-air ventilation when the weather warms up. Works with a hard top, a soft top, or no top at all — just choose your setup.
Built for work. Ready for the trail.
Features and Benefits
- Built for the Prowler Pro's formed frame — Arctic Cat shaped the 2019-2024 Prowler Pro cage so windshields and cab components fit precisely, and this panel is cut to match it
- Tilts open, vented, or closed in seconds — half when it's hot and dusty, full when it's cold and wet, without swapping windshields
- Shaped to shed water — the top edge bends inward under a soft top or no top so your top lays cleanly over it, outward under a hard top for easier clearance
- Cushioned in the down position — tilts forward toward the hood and body, with foam bumpers protecting the contact points when secured down
- Secure clamp, bracket, and strap mount — clamps secure the lower panel along the vertical uprights, lower brackets fasten to the outside dash using the existing fittings and bolt to the windshield, and nylon straps secure the tilting section
- Nylon washers protect the panel — a nylon washer sits between the bolt head and the polycarbonate so the head can't sink into the panel
- No drilling or cutting required — installs using pre-drilled mounting holes and slots and the existing dash fittings, with no permanent modifications to your rig
- Clear polycarbonate visibility — shaped for your specific UTV application without sacrificing a clear view ahead
- Designed to tow windshield-down — reduces road debris abuse and wind drag on your trailer
- Made in Wisconsin, USA — the TerraRider team focuses on accurate fitment and quality construction, and is available to help verify your machine before you order
Which Durability Level Is Right for You?
Every TerraRider windshield is made from UV-resistant, impact-resistant polycarbonate. The difference between levels is the surface coating and the thickness.
| Durability Level | Material | What You Get | Best For | Part # |
|---|---|---|---|---|
|
Classic Dependable everyday protection |
3/16" polycarbonate | Reliable protection from wind, debris, branches, and changing weather at our most economical price. | Property owners, farmers, and occasional riders who want dependable protection without paying for upgrades they don't need. |
TK00134 (for hard top) TK00275 (for soft or no top) |
|
VisionGuard Clarity that lasts |
3/16" scratch-resistant polycarbonate | Same thickness as Classic, with an abrasion-resistant surface coating that stands up to scratching and surface wear — so it stays clearer and looks newer over the years. | Riders on dusty or wooded trails, and anyone who cleans their windshield often and wants it to stay clear. |
TK00224 (for hard top) TK00276 (for soft or no top) |
|
TrailMax Maximum strength for demanding riders |
1/4" scratch-resistant polycarbonate | Thicker material with the same abrasion-resistant coating as VisionGuard. The most rigid option in our lineup — less flex at speed, better durability in demanding conditions. | Higher-speed riders, hunters, and ranchers putting in hard hours where flex and durability matter most. |
TK00421 (for hard top) TK00422 (for soft or no top) |
What's Included
For a hard top
- (1) Tilting windshield panel
- (4) Clamps, 1/8" T x 3/4" W
- (2) Dash brackets, 1/8" T x 3/4" W
- (4) Nylon straps, 12"
- (7) Foam bumpers, 1" OD, black, sticky-back
- (6) Phillips bolts, 1/4-20 x 1"
- (4) Nylon washers, 1/4"
- (6) Lock washers, 1/4"
- (6) Hex nuts, 1/4-20
- (1) Installation guide
For a soft top or no top
- (1) Tilting windshield panel
- (4) Clamps, 1/8" T x 3/4" W
- (2) Dash brackets, 1/8" T x 3/4" W
- (4) Nylon straps, 12"
- (7) Foam bumpers, 1" OD, black, sticky-back
- (6) Phillips bolts, 1/4-20 x 1"
- (6) Nylon washers, 1/4"
- (6) Lock washers, 1/4"
- (6) Hex nuts, 1/4-20
- (1) Installation guide
About Our Tilting Windshield
A TerraRider tilting windshield for your UTV, or side-by-side, is our most versatile style, built for riders who want it all. It tilts down toward the front, letting you switch between fully closed, vented, or fully open positions in seconds — no tools needed. Whether you're braving winter chill or cooling off mid-summer, it adapts instantly to your ride. If the standard height doesn't suit your setup, we can size the tilting section to your spec at no extra cost.
Textron Off Road launched the Prowler Pro for 2019 as a pure-utility machine built around quiet operation and powered by an 812cc three-cylinder engine. It was built for farmers and hunters who value a machine that doesn't announce itself — long days of work, property use, and time outdoors.
Every panel is manufactured — not imported or reproduced — right here in Wisconsin, and supported by people who can help verify your fitment. At TerraRider, every windshield is built from premium polycarbonate for unbeatable strength and clarity, so you can ride with confidence, whatever your day brings — fence lines at sunup, gear hauled back from a hunt, a long day on the trail.
This windshield fits the 2019 Textron Off Road Prowler Pro; the 2020-2024 Arctic Cat Prowler Pro, Prowler Pro XT, and Prowler Pro CREW; and the 2020-2024 Tracker Off Road 800SX.
Fitment — 2019-2024 Prowler Pro
| Year(s) | Make | Model | Submodel | Fits |
|---|---|---|---|---|
| 2019 | Textron Off Road | Prowler | Pro | Yes |
| 2020-2024 | Tracker Off Road | 800SX | — | Yes |
| 2020-2024 | Arctic Cat | Prowler | Pro | Yes |
| 2020-2024 | Arctic Cat | Prowler | Pro XT | Yes |
| 2020-2024 | Arctic Cat | Prowler | Pro CREW | Yes |
Fitment note: Aftermarket roofs, mirrors, light bars, cab enclosures, or other cage-mounted accessories may interfere with windshield installation. Please verify accessory clearance before placing your order. If you have any questions about fitment or existing accessories, contact us before ordering and we'll be happy to help.
Buy With Confidence
UTV body styles, roll cages, and cab configurations can vary between model years, making windshield selection confusing. Need help confirming fitment? Our team can review your year, make, model, measurements, or photos to help determine the correct windshield application before ordering.
Should you need a return or exchange, you may do so within 30 days, as long as the protective coating hasn't been peeled back further than needed to expose the mounting holes during install.
Cleaning and Warranty
Every TerraRider UTV windshield includes a two-year limited warranty covering yellowing, discoloring, or breaking due to manufacturer or material defects.
Never wipe a dry or dirty windshield — rinse away dirt and debris with clean water first, then use a microfiber cloth in long, straight swipes. Proper care is a condition of the warranty — full cleaning instructions and complete warranty terms are on our website.