Adapt to changing weather on your Arctic Cat Prowler with a TerraRider tilting UTV windshield, designed specifically for 2011–2014 Prowler models for accurate, verified fitment. Works with a hard top, a soft top, or no top at all — just choose your setup. It tilts down toward the front, so you can switch between open, vented, or fully closed in seconds, no tools needed.
Built for work. Ready for the trail.
Features and Benefits
- Built for the round tube cage — engineered specifically for 2011–2014 Arctic Cat Prowler models, which use the round tube roll cage introduced that year
- Tilts open, vented, or closed in seconds — half when it's hot and dusty, full when it's cold and wet, without swapping windshields
- Cushioned in the down position — tilts forward onto the hood, with foam bumpers protecting the surface and preventing rattle where it rests
- Shaped to shed water — the top edge bends inward under a soft top or no top so your top lays cleanly over it, outward under a hard top for easier clearance
- Center support steadies the top section — a metal support braces the tilting section in the up position, with a tool-free wing nut release on the hard top version
- Secure clamp and bracket mount — rubber-sleeved clamps wrap the roll bar uprights and dash brackets fasten to your existing dash screws, with nylon straps securing the tilting section for a tight, rattle-free fit
- Fits most setups right out of the box — sized to clear standard roof heights and roll bars. Need a different height? We can custom down-size the tilting section to your exact spec at no additional cost
- No drilling or cutting required — installs using pre-drilled holes and your UTV's existing hardware, with no permanent modifications to your rig
- Designed to tow windshield-down — reduces road debris abuse and wind drag on your trailer
- Made in Wisconsin, USA — the TerraRider team focuses on accurate fitment and quality construction, and is available to help verify your machine before you order
Which Durability Level Is Right for You?
Every TerraRider windshield is made from UV-resistant, impact-resistant polycarbonate. The difference between levels is the surface coating and the thickness.
| Durability Level | Material | What You Get | Best For | Part # |
|---|---|---|---|---|
|
Classic Dependable everyday protection |
3/16" polycarbonate | Reliable protection from wind, debris, branches, and changing weather at our most economical price. | Property owners, farmers, and occasional riders who want dependable protection without paying for upgrades they don't need. | TK00127 (for hard top) TK00304 (for soft or no top) |
|
VisionGuard Clarity that lasts |
3/16" scratch-resistant polycarbonate | Same thickness as Classic, with an abrasion-resistant surface coating that stands up to scratching and surface wear — so it stays clearer and looks newer over the years. | Riders on dusty or wooded trails, and anyone who cleans their windshield often and wants it to stay clear. | TK00303 (for hard top) TK00305 (for soft or no top) |
|
TrailMax Maximum strength for demanding riders |
1/4" scratch-resistant polycarbonate | Thicker material with the same abrasion-resistant coating as VisionGuard. The most rigid option in our lineup — less flex at speed, better durability in demanding conditions. | Higher-speed riders, hunters, and ranchers putting in hard hours where flex and durability matter most. | TK00406 (for hard top) TK00407 (for soft or no top) |
What's Included
For a hard top
- (1) Tilting windshield panel
- (5) Rubber-sleeved clamps, 1 3/4"
- (1) Center support, 3 1/4"
- (2) Dash brackets, 1/8" T x 3/4" W
- (4) Nylon straps, 12"
- (6) Foam bumpers, 1" OD, black, sticky-back
- (6) Phillips bolts, 1/4-20 x 3/4"
- (2) Phillips bolts, 1/4-20 x 1"
- (8) Lock washers, 1/4"
- (7) Hex nuts, 1/4-20
- (1) Wing nut, 1/4-20
- (1) Installation guide
For a soft top or no top
- (1) Tilting windshield panel
- (4) Rubber-sleeved clamps, 1 3/4"
- (1) Center support, 3 1/4"
- (2) Dash brackets, 1/8" T x 3/4" W
- (4) Nylon straps, 12"
- (2) Nylon straps, 10"
- (5) Foam bumpers, 1" OD, black, sticky-back
- (4) Phillips bolts, 1/4-20 x 3/4"
- (2) Phillips bolts, 1/4-20 x 1"
- (6) Lock washers, 1/4"
- (6) Hex nuts, 1/4-20
- (1) Installation guide
About Our Tilting Windshield
A TerraRider tilting windshield for your UTV, or side-by-side, is our most versatile style, built for riders who want it all. It tilts down toward the front, letting you switch between fully closed, vented, or fully open positions in seconds — no tools needed. Whether you're braving winter chill or cooling off mid-summer, it adapts instantly to your ride. If the standard height doesn't suit your setup, we can size the tilting section to your spec at no extra cost.
For 2011, Arctic Cat replaced the Prowler's square tube roll cage with a Baja racing-inspired round tube design — a change riders had asked for, since the square cage made it difficult to fit accessories. That new cage is exactly why this windshield is specific to 2011–2014 machines, and it's why the kit mounts with rubber-sleeved clamps that wrap the round tube.
Every panel is manufactured — not imported or reproduced — right here in Wisconsin, and supported by people who can help verify your fitment. At TerraRider, every windshield is built from premium polycarbonate for unbeatable strength and clarity, so you can ride with confidence, whatever your day brings — fence lines at sunup, gear hauled back from a hunt, a long day on the trail.
This listing covers the 2011–2014 Arctic Cat Prowler lineup, including the 550 XT, 700 XTX, and 1000 XTZ submodels. It does not fit the Prowler HDX.
Fitment — 2011–2014 Arctic Cat Prowler
| Year(s) | Make | Model | Submodel | Fits |
|---|---|---|---|---|
| 2011-2014 | Arctic Cat | Prowler | 550 XT | Yes |
| 2011-2014 | Arctic Cat | Prowler | 700 XTX | Yes |
| 2011-2014 | Arctic Cat | Prowler | 1000 XTZ | Yes |
| 2011-2014 | Arctic Cat | Prowler | HDX | No |
Buy With Confidence
UTV body styles, roll cages, and cab configurations can vary between model years, making windshield selection confusing. Need help confirming fitment? Our team can review your year, make, model, measurements, or photos to help determine the correct windshield application before ordering.
Should you need a return or exchange, you may do so within 30 days, as long as the protective coating hasn't been peeled back further than needed to expose the mounting holes during install.
Cleaning and Warranty
Every TerraRider UTV windshield includes a two-year limited warranty covering yellowing, discoloring, or breaking due to manufacturer or material defects.
Never wipe a dry or dirty windshield — rinse away dirt and debris with clean water first, then use a microfiber cloth in long, straight swipes. Proper care is a condition of the warranty — full cleaning instructions and complete warranty terms are on our website.
