Help limit dust swirl, mud, and trail debris behind the cab of your 2017-2026 Can-Am Maverick X3 with a TerraRider rear UTV windshield, also called a back windshield. Designed specifically for the Maverick X3, this rear panel works with or without intrusion bars while maintaining clear rearward visibility. This windshield does not fit Can-Am Maverick X3 MAX models.
Built for the desert. Ready to run wide open.
Features and Benefits
- Built for the Maverick X3 — engineered specifically for the 2017-2026 Can-Am Maverick X3 and fits models with or without intrusion bars
- Complete rear dust and debris protection — covers the opening behind the cab, helping limit dust swirl, mud, sand, and trail debris from coming forward into the cab
- Secure clamp-and-strap mount — rubber-sleeved clamps wrap the vertical roll-bar uprights through the windshield's pre-drilled side holes for a tight, rattle-free fit, while nylon straps pass through the top and bottom slots and secure around the roll bar
- No drilling or cutting required — installs using pre-drilled holes and slots and the included hardware, with no permanent modifications to your rig
- Clear polycarbonate visibility — shaped for your specific UTV application without distorting your rearward view
- Tow-ready — trailerable as installed, no need to remove it for transport
- Made in Wisconsin, USA — the TerraRider team focuses on accurate fitment and quality construction, and is available to help verify your machine before you order
Which Durability Level Is Right for You?
Every TerraRider windshield is made from UV-resistant, impact-resistant polycarbonate. The difference between levels is the surface coating.
| Durability Level | Material | What You Get | Best For | Part # |
|---|---|---|---|---|
|
Classic Dependable everyday protection |
3/16" polycarbonate | Reliable protection from dust, mud, and trail debris at our most economical price. | Property owners, farmers, and occasional riders who want dependable protection without paying for upgrades they don't need. | TK00496 |
|
VisionGuard Clarity that lasts |
3/16" scratch-resistant polycarbonate | Same thickness as Classic, with an abrasion-resistant surface coating that stands up to scratching and surface wear — so it stays clearer and looks newer over the years. | Riders on dusty or wooded trails, and anyone who cleans their windshield often and wants it to stay clear. | TK00497 |
What's Included
- (1) Rear windshield panel
- (2) Rubber-sleeved clamps, 2"
- (5) Nylon straps, 12"
- (2) Phillips bolts, 1/4-20 x 3/4"
- (2) Lock washers, 1/4"
- (2) Hex nuts, 1/4-20
- (1) Installation guide
About Our Rear Windshield
Looking for rear dust and debris protection? A TerraRider rear windshield for your UTV, or side-by-side, covers the opening behind the cab, helping limit dust swirl and keeping your gear and passengers cleaner. It's a solid choice for dusty, muddy, wooded, or wet trail conditions, especially for riders who already have a front windshield and want added rear protection.
Can-Am introduced the Maverick X3 for 2017 as its flagship performance side-by-side, then brought media to Baja to drive it across the same rugged terrain used by the Baja 500 and Baja 1000. At launch, the X3 combined a 154-horsepower turbocharged three-cylinder Rotax ACE engine with up to 24 inches of suspension travel.
Every panel is manufactured — not imported or reproduced — right here in Wisconsin, and supported by people who can help verify your fitment. At TerraRider, every windshield is built from premium polycarbonate for unbeatable strength and clarity, so you can ride with confidence, whatever the terrain brings — long desert washes, steep dune faces, a rocky climb on the way back to camp.
This windshield fits the 2017-2026 Can-Am Maverick X3 and works with or without intrusion bars. It does not fit the 2017-2026 Can-Am Maverick X3 MAX, 2013-2018 original Maverick models, Maverick Trail models, Maverick Sport models, or Maverick R models.
Fitment — 2017-2026 Can-Am Maverick X3
| Year(s) | Make | Model | Fits |
|---|---|---|---|
| 2017-2026 | Can-Am | Maverick X3 | Yes |
| 2017-2026 | Can-Am | Maverick X3 MAX | No |
| 2013-2018 | Can-Am | Maverick original models | No |
| Can-Am | Maverick Trail models | No | |
| Can-Am | Maverick Sport models | No | |
| Can-Am | Maverick R models | No |
Not sure which you have? Send us photos or measurements and we'll confirm before you order.
Fitment note: Aftermarket roofs, rear light bars, spare tire carriers, bed rails, cargo racks, or other cage-mounted accessories may interfere with windshield installation. Please verify accessory clearance before placing your order. If you have any questions about fitment or existing accessories, contact us before ordering and we'll be happy to help.
Buy With Confidence
UTV body styles, roll cages, and cab configurations can vary between model years, making windshield selection confusing. Need help confirming fitment? Our team can review your year, make, model, measurements, or photos to help determine the correct windshield application before ordering.
Should you need a return or exchange, you may do so within 30 days, as long as the protective coating hasn't been peeled back further than needed to expose the mounting holes during install.
Cleaning and Warranty
Every TerraRider UTV windshield includes a two-year limited warranty covering yellowing, discoloring, or breaking due to manufacturer or material defects.
Never wipe a dry or dirty windshield — rinse away dirt and debris with clean water first, then use a microfiber cloth in long, straight swipes. Proper care is a condition of the warranty — full cleaning instructions and complete warranty terms are on our website.